Pop-Up Templates

I made templates for each of the four scenes I created. I printed them off and cut & glued the pieces together by hand. The front and back cover was also created by hand. It takes a day to make one of the books!

This is the marker for the Doctor Panda first aid instruction video:

Once I publish my Junaio App, everyone will be able to print off this marker and scan the image with their device and watch the augmented reality I created ūüôā

Advertisements

Character Beauty Shots

I rendered some beauty shots of my main origami characters and origami cube characters from 3D Studio Max:

Exhibition Show

The exhibition was a great success and really fun! The show was held on the 14th June in the London Street Gallery in Derry/Londonderry. It will also be running from Monday 17th to Thursday 20th with free admission. (10am to 4pm) Come check it out!

Here’s a link to the London Street Gallery: http://www.londonstreetgallery.org/off-the-cuff.html

Here are some of the pictures I took of the exhibition:

 

Some close-ups of my origami pop-up book:

 

I covered a whole sofa with my stuff whilst getting my exhibition ready:

Expeimenting Pop-Up Scene Size

I first made the pop-up scene with an A4 sheet, next I tried out an A3 sheet and also an A2 sheet, here are the results:

A3 Sheet РBrighter colour 

I also made the colours brighter to see how it would turn out. I like the ‘pop’ it gives, makes it more appealing to children.

 

 

A2 Sheet

 

 

 

Origami and Acetate Quick Experiment

I cut a a¬†small circle from an acetate sheet and made origami leaves and roses. I’ve included pictures of the origami instructions I used to make the leaves (Sorry about the quality!):

leaf instructions

Taken from ‘Origami Fold-A-Day Calender 2013’

 leaf instruction

leaf instruction 2

leaf instruction 3

Taken from ‘The Simple Art of Japanese Papercrafts’

Origami Flat Rose

Taken from Google Images

Quick Experiment

I stuck the dark green leaves on the acetate using Anita’s glue and then cut a smaller circle piece from the acetate and glued on the smaller light green leaves. The roses were glued on afterwards. After the glued dried, you could barely see the glue marks. I don’t like how it turned out, so I decided to try again and make it similar to the vector trees that inspired me.

Origami Leaves and roses

Better Result

Origami Leaves and Tree

This is more like how I wanted the trees to look, breathing room for the leaves and color co-ordination. I like how it turned out even without adding layers, but I still need to nail my style for my project!

Origami Folded Characters

I finally got my origami characters uploaded! I managed to fold them how I drew them and seen them in my head. I used these as guides as I was modelling the characters in 3D Studio Max. The creases will also work as guides when I start texturing the little cubes.

Here are more views of the little cube characters:

The Chick’s fluff on the top of its head was difficult to fold so I have made it close to how I have designed the character as possible. Below is my first attempt, you can see that the fluff was starting on the sides of the head rather than just the middle.

I made an extra character, which is just a plain origami cube, who will be the little characters acting out the 10 second scenario scene in which one has an accident.

My 3D Characters

When I first modelled my puffy bunny character it was influenced by the origami bunny I made so I modelled the front triangular parts:

But when I modelled the rest of the characters after the origami models I made, they didn’t have the front triangular parts which made the characters not seem to have a consistent style as you can see below:

Bunny With Front Flaps Only

I took out the front parts from the bunny and it worked out much better:

Flaps in the same place

Another thing I noticed was how the flaps on the side were too thin and they were not shaping¬†right. You can see below that they look like thin planes attached to a cube. I also modelled flaps on the bottom but I realised it meant that I was going over the 2,000 polygons count limit for Junaio AR use so I took them out. They also weren’t necessary either as you won’t see the bottom of the 4 main characters.

Flaps in the same place

All the characters had flaps on their side but when I made all the characters using origami techniques, only two of the characters had flaps on their side. To make the bunny and the panda the flaps remained on their side, whilst the cat and the chick had their flaps on the top to keep their ears/fluff in place.

The bunny modelling adjustment meant I also had to remake the origami bunny so that the front parts do not appear, I will upload the images of my origami characters soon. But for now below you can see how it will turn out, the ears now start in the middle forming a central point rather than being spread apart.

Bunny With no Front Flaps

I had to thicken the flaps and add more polygons around the flaps to add more shape and structure.

Modelling

When I model my characters I model half the model as it is usually symmetrical. The chick was a bit difficult as the fluff was placed in the middle of the model. I modelled half the model with the fluff attached and then added a symmetry modifier and deleted the extra fluff which copied along with the other half of the model.

When I modelled the nurse cap I used a chamfer¬†box, deleted half¬†of it and half again to leave me with a quarter of the chamfer box. I started extruding from here and then added symmetry modifier twice to make the whole model appear. I placed ‘edit poly’ on top of the stack and altered the front and back of the nurse cap to make it look similar to the origami model. The origami fireman hat I made does nt have the badge on it but I managed to make the hat with one square piece of paper. I will either have the badge printed on the piece of paper before it is folded or try to figure out an origami badge to place on the hat.

Graphics on the Origami Paper

I think it would be a good idea to take note of the faces and ear positions etc of the origami models and unfold them and see where the positions are on the unfolded model. This means I can place graphics there such as eyes, mouth, the panda’s head mirror, the fireman badge so that when children make them the graphics are already there. I could also leave plain paper for them and they can draw their own faces if they wish to.

The fireman hat was modelled similarly to the nurse cap and I added a plane and shaped it into the fireman badge which is usually on the front of the hats

All the characters have meshsmooth applied to them.

The bunny had 1,962 polygons in total

The Cat had 1,960 polygons including her nurse cap

The panda had 1,772 polygons

The chick had 2,000 polygons including the fireman hat and the badge

Here is how my little cube characters turned out:

A Problem

I realised my characters have to have a mouth so they can speak and have a lip sync so I need to figure out how it will look. I also have to work around the 2k polygon limit, especially in the case of the chick having 2,000 polygons already!

Origami Characters

My 4 Main characters:

Bunny (Teacher/Mother?)

Cat (Nurse)

Panda (Doctor)

Chick (Fireman)

Bunny Character

I know what the characters profession will be except for the female bunny as I am not sure whether it will be a teacher or a mother. It could be a teacher and relate to all the characters having an occupational job with a tie, apple, pencil or glasses to represent the profession. Or I could make the bunny be a mother to show the children that their parents can help them in a first aid situation. The key prop could be an apron but I don’t want to be sexist or offend parents with a clich√© mother so I would need to think about it more.

Nurse Kitty

The cat will be a female nurse and I have decided to add a nurse hat as its prop as it is a universally recognized symbol of nursing even though it is not used any more. The correct term for these items was a ‘nurse’s cap’ or ‘nursing cap’ which is part of the female nurse’s uniform. The nurse cap was introduced early in the history of the profession and the original purpose was to keep the nurse’s hair neatly in place and present a modest appearance.

Nurse Cap

Doctor Panda

The Panda is a male doctor and the prop won’t be made from origami, rather it will be textured on the model. The prop will be a head mirror used in the old days:

Doctor Head Mirror

Doctor Head Mirror

Fireman Chick

The little chick will be a male fireman and it will have a fireman hat as it’s prop. At first I was modelling the hat influenced by real fireman hats but I decided to try make an origami fireman hat and then model after the origami hat. This means I can actually make the prop and place it on the puffy cube chick character.

Nurse Kitty’s Origami Nurse Cap

Modelling the Nurse Cap

At first I modelled the nurse hat similarly to a typical nurse cap shape at the same time I started modelling my characters, so I wasn’t thinking about how I would fold the hat using origami techniques.

Here is my first nurse hat attempt:

I made the nurse cap round and cute with the intention of making it simple like the character style. Then I decided to remodel the cap similarly to how the nurse caps looked and choose between the two caps to be used as the prop.

Here is my second nurse hat attempt:

I asked my supervisor which one he liked best and he liked the first one better whilst I liked a bit of both of the models. I liked the front shape of cap 2 and the pudginess of cap 2. However, as mentioned before my supervisor suggested that the characters could be made using origami techniques so children and visitors at the end of year show could make the characters for themselves.

Origami Hats

I started looking into origami hats and at first they weren’t what I was looking for. They were too pointy and basically not the shape I was looking for.

Then I came across the ‘crown origami hat’ and with just a little adjustment it would be perfect.

Crown Origami Hat

Crown Origami Hat

To make my nurse cap I will fold in three of the flaps and slightly fold the tip of the last flap to make it more rounder. I will upload my origami nurse cap soon.

My 3D Model

Here is how the remodelling turned out:

Enter your email address to follow this blog and receive notifications of new posts by email!